Kittatinny Roofing

Roof inspection

On a slate roof, an inspection is not a formality — it is the thing that decides between repairing for a few thousand and replacing for many times that. Nowhere else in the trade does an hour of looking move a number that far.

When it pays here

Before buying, above all. The housing in this valley routinely predates any record anyone kept, and on a slate roof the visible material tells you almost nothing about the fasteners holding it or the deck beneath. A buyer without an inspection is guessing at one of the largest numbers in the transaction.

Before deciding what to do with a slate roof, second, and this is the case unique to this region. Repair, replace in kind, or change material entirely: the three answers are separated by an order of magnitude, and only a proper look settles which one applies.

And after a winter that left ice at the eaves. Damage from that is at the edge and under the covering, which is precisely where nobody looks from the ground.

What a real inspection covers

It starts in the attic, because on old framing the deck and the rafters tell the truth about both water and weight. Spaced sheathing, previous repairs, staining, and whether the structure has moved under a century of slate.

Then the roof itself, walked where it is safe to walk and examined properly where it is not. Slate is not walked casually: a crew that treats it like shingle will break pieces while inspecting it. Then the valleys, the party wall junctions, the chimney, and the rear section that nobody sees from the street.

What it costs and what it saves

It is priced in the low hundreds and it moves decisions priced in the tens of thousands. Buyers use it to negotiate, owners use it to time work on their own calendar rather than the roof’s, and anyone with slate uses it to find out whether they are sitting on a liability or on fifty more years.

Quick answers

The slate looks fine from the street. Is there anything to see?
Usually yes. Slate fails at its fasteners and at the valleys long before the field looks bad, and neither is visible from the ground.
Can any roofer inspect a slate roof?
Any roofer can look at one. Fewer can walk it without breaking it, and fewer still can tell you whether the structure will carry a replacement in kind.
Is a drone inspection enough?
It is a good start and a poor finish. The attic, the fastener condition and the rear roof tell the parts of the story a lens cannot reach.
A roof here rarely gives out in the field. On old housing it gives out where two centuries meet. Where the work actually happens on a roof.
Garage Point 1: the ridge 1 Point 2: the field of the covering 2 Point 3: the valleys 3 Point 4: flashing at a shared wall 4 Point 5: a penetration 5 Point 6: the overhang 6
  1. 1 The ridge. The highest course, and on slate the one most often reset by hand.
  2. 2 The field. Slate on the older stock, shingle on the rest. Two very different clocks.
  3. 3 Valleys. Where leaf litter settles, and where a slate roof usually ends its life.
  4. 4 Wall flashing. The party wall of a row or twin, rising through a roof two houses share.
  5. 5 Penetrations. Holes cut on purpose. When access is awkward they get sealed instead of rebuilt.
  6. 6 The overhang. Where meltwater from a warm attic reaches cold framing and stops.

The rest of the work

Areas covered

All areas covered